How to Perform SD Card Lost Data Recovery on Mac

Nowadays, SD card is widely used in our daily lives ’cause it facilitates us to store some small but important files like photos, little digital video tape or documents, etc. But sometimes users may delete these files mistakenly or format the SD card accidentally. When you are facing these situations, what will you do? There is not another chance to take another photo which is the same as the lost one. Or you may have to rebuilt another document after you lose it- this means you have to pay more time. So, is there an effective way to recover lost files from SD card?

Yes, you come to the right place and we will answer you that you can recover your SD card lost files with uFlysoft Data Recovery for Mac. With it, you can deal with the SD card data loss problem without asking the professor or expert. No matter the SD card comes from the cellphone, camera, camcorder even GameCube, you still have the chance to recover the lost data by some click jobs.

How to Recover Lost Data on SD Card

You have to remember that after data loss happens, you should stop using your SD card at once. This is because any write operation will cause the data overwritten situation, and the data overwritten situation will result in the data loss problem and you will lose the data forever. So, you are recommended to use uFlysoft Data Recovery for Mac.

Follow the steps below to recover your lost data on your SD card.

Step 1-Plug You SD Card in Your Mac

Plug your SD card in your Mac with the card reader or without pulling out the card and plug in your device. Run uFlysoft Data Recovery for Mac after installing it on your Mac. In the normal situation, your card will be shown on the bottom of the software interface. If not, please check if your card is damaged or if your card can be read by your computer.

Step 2-Scan the SD Card

When you see your card is shown on the software interface, move your mouse to choose your card by one click, and then move your mouse again to click “Scan” button to start “deeply scan” operation.

Step 3-Preview and Recover

After scanning is finished, you will find the scanning results are listed on your left side. You can choose the photo files to preview, once you ensure the photo is the one you want to recover, tick the little box in front of the file and then click button “Recovery”. After a while, you will find that all of the lost files are recovered successfully from your SD card.

Users can check the video tutorial to get the simple guidance of the data recovery process.

More Tips for Users

What Is SD Card

SD Card, short for Secure Digital card, is a flash memory card developed by the SD Association (Panasonic, Toshiba, and SanDisk). It’s widely used in mobile phones, digital cameras, and tablet computers. The capacities of SD Card varies from 512 MB, 1 GB, 2 GB, 4 GB to 64 GB. SD Card has also many variants like SD memory card, SDHC, SDXC, miniSD and microSD. The SD Card is very slim and but can save large amount of data.

SD Card Data Recovery Notes

1. The best way to recover SD card lost data is pulling out the card from your device so that you can avoid the device overwrite the old data on the SD card.

2. Don’t do any write process or defrag your card. Pull out the SD card immediately once data loss happens.

3. Don’t save the recovered data on your SD card, save the data on your Mac or other storage devices which has enough space to store the data.

4. For more information about data loss or data recovery, users can go to our official website by clicking uFlysoft studio.