Step by Step for Mac Problem Troubleshooting

When problems happen on any Mac there are some basic troubleshooting steps that you can take. Unfortunately, many times people have no idea where to start, and problems may seem to be vastly different. For instance, sometimes specific functions, features, or settings of the system may not work properly, or applications may crash, or the computer may just be running slowly and lag all the time.


When these problems happen, there some basic steps you can take to start troubleshooting the problem. Even if you cannot isolate and fix the issue, performing these steps and relaying what you see to a technician, Apple “Genius,” or anyone else helping you may greatly speed up the process and get the problem addressed.



Safe Mode


One of the very first things you should try if a problem starts repeatedly occurring on your system is to boot into Safe Mode by restarting and then holding the Shift key after you hear the boot chimes. Doing this turns off unnecessary system extensions and loads the system in a minimal state. Safe Mode also runs a few system maintenance routines that may help clear problems. Once the system has fully booted in Safe Mode, try rebooting normally.


If the problem goes away when booted in Safe Mode but persists when the computer is booted normally, then the problem has to do with a third-party or nonessential system extension you have loaded on the system. Many applications can install these, including virtualization tools, drivers and hardware managers, and firewalls and security tools.



Peripherals


After attempting a Safe Mode boot, you can try troubleshooting peripheral devices attached to your system, such as external hard drives, scanners, printers, and secondary displays. Disconnect these devices fully from your system (as opposed to merely shutting them down) and reboot to see if the problem goes away. If it does, then you can test each device independently to see if having it attached to the system (by itself or in combination with another device) results in the odd behavior.


Many times specific applications will interface with certain devices, such as scanners and image processing tools. In these cases, you can try using Safe Mode in addition to removing all devices except the one that application uses, to test whether the application interfaces better with the peripheral when running in a minimized boot environment.



General maintenance routine


Sometimes slowdowns and odd behavior can happen because the various temporary files (caches) that the system builds for efficiency become corrupt. When this happens, cleaning these out can be an easy way to rebuild them and thereby speed up the system again. To do this, run a general maintenance routine to fully reset software setups like caches as well as hardware configurations like the PRAM and SMC settings. Resetting these will not harm the system, but may require you to set things like the mouse tracking rate and system volume again.



New user account


Many times problems in the system have their roots either in global resources (resources the whole system accesses), or in a specific user account configuration. OS X separates these by putting global items in the /Macintosh HD/Library/ and /Macintosh HD/System/ folders as opposed to the /username/Library/ folder.


An easy way to test this is to create a new user account on the system and log in to it to see if the problem persists in this account. If not then it is very likely the issue involves a configuration setting in your main account, and you can try clearing configuration files, preference files, and other settings in that account to fix the problem.


While you can use an existing secondary account to check the problem, existing accounts may share similar configurations (especially if they were upgraded, migrated, or restored from previous systems or backups). Creating a new account ensures that the account and its settings are as fresh as the current system can make them.



Activity Monitor


If an application is using system resources, especially if it is experiencing bugs that cause it to eat up memory or CPU cycles, then other programs can suffer slowdowns as the system tries to compensate for the rogue application. To check for available system resources, launch the Activity Monitor utility (in /Applications/Utilities/) and at the bottom of the main Activity Monitor window (press Command-1 to show it if it’s not present), click the CPU, System Memory, and Disk Activity tabs to check those resources on the computer. If any of these sections shows high usage, then you can look to see if a specific program is causing the high activity.


To do this, at the top of the main Activity Monitor window click the “%CPU” column header to sort processes by CPU usage, and if one is showing persistent high CPU usage (especially if it’s at or near 100 percent) then try shutting it down. If the program is not responding and its name is shown in red, you can try force-quitting it to shut it down.


In addition to checking CPU usage, sort the listings in the “Real Mem” column to see if any are taking a large amount of RAM, and quit them. One culprit that may take up a large amount of RAM is Safari, but sometimes background system processes such as “mds” or “mdworker” may also take a large amount of RAM or CPU if they are not working properly.



System Console


In addition to Activity Monitor, the system will show process output (including errors and warnings) in the system console and system logs. These can be exceptionally useful resources for determining if applications and system processes are crashing or not working properly.


To access the system logs and console output, go to the /Applications/Utilities/ folder and open the Console program. In here you can select the All Messages section to view live output from running processes, or look up recent crash logs in the System or User Diagnostic Reports sections.


Even if you do not know what to look for, if you see a specific warning or message output to the console when the slowdowns occur then that information may be useful to a technician, and you can easily copy it into an e-mail if needed.



Uninstall or disable features or applications


If the problem is not found to be in the account configuration, then you can next try uninstalling applications or disabling any other recent changes you might have made to the system. This is particularly true for any add-ons, program updates, or new applications you have added.


Unfortunately OS X does not come with an uninstaller utility or other application management tools, but you can use tools like AppZapper to root out and remove applications that did not come with an uninstaller. Alternatively you can contact the developer to ask how to fully remove the program.


If the problem happened right after an OS update, then your only options for uninstalling are to revert to a prior system backup (Time Machine backups are great for this), or reinstall OS X fully and update to the latest version again. This can be done using the OS X installation disc (or recovery drive for Lion).


Once again, these steps alone may not fix the problem for you, but they will help you isolate the issue and see if it is happening because of a specific device, account setup, system process or application you have running, or some underlying system extension or resource. Even if you cannot clear the problem yourself, the information you get from these steps will be useful for others who help you address the problem.


If you still need more help in solving Mac problem such as you want to solve data loss problem on Mac, view more articles tutorial on our site (http://www.uflysoft.com) whenever you want.

Method to Recover Data from An Old SCSI Drive

It’s the season for cleaning, and maybe you’ve found an old Mac in a closet or off to the side somewhere in your garage. That Mac is a time capsule and it might be fun to see what’s on the hard drive. The challenge: how to transfer data from your old Mac’s SCSI hard drive to your current Mac.


In my case, someone contacted me asking if I could recover the lost data from a Mac hard drive, complete with a power supply so old it wouldn’t turn on. There’s a certain joy in working with old hardware, but it’s still a drawn-out project.


Many old Macs used SCSI connections for internal and external hard drives. Modern-day Macs use SATA for internal hard drives, and USB or Thunderbolt for external drives. So we need to find a way to access the data on the SCSI drive, and then transfer it to a modern Mac.



SCSI-to-USB


Adaptec’s USBXchange functions as a terrific bridge device between your old Mac’s SCSI port and any USB device you care to hook into it. Mac OS 8 and 9 drivers may be difficult to pin down, they can still be found online.


The USBXchange is used to connect a USB hard drive to your old Mac. After installing the drivers, you connect the USBXchange to the SCSI port of the old Mac, and then connect the hard drive to the USBXchange’s USB port. You can then copy over the data from the old Mac’s hard drive to the external storage device.


Adaptec considers the USBXchange an “obsolete product” so you’ll have to look for a used one online.



Old Macs and USB cards


If there was ever a definitive kick in the pants for old school Mac owners, it was the fact that Apple never made a Mac with both SCSI and native USB onboard. So, older hardware with expansion slots are handy, and Apple’s beige G3 desktop and tower machines remain best of breed computers in terms of machines that run Mac OS 9 speedily, are fun to work with, and can readily accommodate a USB card for any of its PCI expansion slots.


While it might take some time to hunt down one of these old Macs at a local Mac user group garage sale or eBay, the end result is worth it. If you have a bunch of older SCSI drives, you can readily install the SCSI drives as needed into these machines. With the USB card in one of the PCI slots, you can connect a USB storage device and then copy the data.



Sonnet Allegro USB 2


Sonnet’s Allegro USB 2 card is available for $30 and supports Mac OS 9 and later. Other USB PCI cards can be found through searches on Amazon and eBay and drivers can still be acquired online as needed.



Floppy drives


How about turning to old tech to fix the problem? Since the files on your old Mac are very likely small in size, you might want to consider getting a USB floppy drive, which costs about $20 through retailers like Newegg and Amazon, and some 3.5-inch floppy disks. Connect the floppy drive to your old Mac, copy the files to floppy disks, and then connect the drive to your current Mac and copy the files over.



Data transfer


If there’s anything the flash memory industry has taught us over the years, it’s how quickly storage technology evolves—a 4GB hard drive seemed almost otherworldly throughout the 90s, but they now retail for under $10 as an impulse item at almost any drug store.


Once your older Mac is in place and is ready to communicate with both its internal SCSI drive as well as an external USB device, it’s time to move the files over. Keep things simple: insert the USB flash drive, let your Mac format it to the Mac OS Extended file structure, and then copy the files over in small chunks to make the task easier for an old hard drive that may not have seen use for some time. Eject the USB flash drive, insert it into your current Mac,and copy the recovered files over.


If you have files needing to be recovered from an old SCSI drive, it’s best to address this sooner rather than later. I’ve always considered Macs to be well made and somewhat invincible—a friend and I used the joke that the Apple II series computers would be the only things (along with cockroaches and Twinkies) to survive a nuclear war—components can still degrade over time and become that much harder to repair, replace, and shop for as the years go by.


If you need other details about Mac lost data rescue process, feel free to view more articles on our official website by clicking uFlysoft studio.

Tips for Avoiding Data Loss Problem on Your Computer Hard Drive

Computers have become a natural way of life for many of us. With this convenience comes the possibility that your machine might crash, causing you to lose every piece of critical information you ever saved on it. The top three reasons computers crash are hard drive failures, registry damage and malware infections. With the prevalence of the internet, all three of these factors make you vulnerable to the loss of data. In order to save yourself the time, money and effort it takes to recover from a disaster, you must how these situations may occur and what can be done to prevent them. And we do also help user if they really need to recover lost data from computer.



Store Data in Different Locations


Most data is loss when the operating system or the hard disk on it fails. This is why you should create at least two partitions if you only have one hard disk on your system. It would be a good idea to store Windows in the first partition and all of your data in the second partition. This reduces the chances of losing your data if the Windows system happens to fail. Another option is to implement an additional hard disk on your system and store files on the new disk. This will protect your data if Windows or the original hard disk fails.


There are also other methods of prevention that can be performed to keep your data secure. Make sure to regularly use the Disk Cleanup utility in Windows to sweep up unwanted files and fragments from your system. You can also run the Disk Defragmenter tool every now and then to consolidate your files and increase the data access time on your hard disk.



Stay Clear of Malware


One of the biggest threats to your data is malicious software, more commonly known as malware.Viruses, Trojans and worms are all on the prowl and can be secretly installed on your system in a number of ways. These destructive programs create a large number of unwanted and harmful entries in your registry, often causing system crashes and compromising multiple machines. This is why you need to protect your computer with reliable security software. A quality anti-malware program is a must these days, along with firewall components. Additionally, you can use a registry cleaning tool to sweep out all of the file remnants left behind from uncomplete installations and malicious entries.


There are number of quality products readily available on the internet to keep your data safe. Security vendors such as McAfee and Symantec offer some of the best programs to protect you against the common threat of malware. There are also many cleaning utilities specifically designed for your Windows registry.



Backup Your Data


The most effective way to avoid the loss of data is to create frequent backups of your files. If this information is of any importance, your backup system must be reliable and used on a regular schedule. The many available storage options allow you to store data on mediums like CDs, DVDs, pen drives, external disk drives, tapes and online storage providers. If this data is really sensitive, it is important to store at least two copies of it and keep at least one copy in secured offsite location.



Final Tips


The tips above can help you to avoid data loss problem, but if you really need to perform data recover on Mac, just visit our official website http://www.uflysoft.com to get more details.

Protect Your Precious Memories Which You Capture During the World Cup

This summer is belonging to the World Cup. Think about that you are in the tour in the World Cup and you take the fantastic photos or videos during the games. This must be a wonderful experience in your World Cup trip. But what if some reasons make you lose the memories you capture in the games? What if you miss Messi’s shot? What if you lose Rooney’s assist? What if you cannot find Cristiano Ronaldo’s penalty kicks on your digital camera or your storage device?


Any wrong operation will lead to data loss and data loss will ruin your World Cup trip memory ‘cause you will not have any records of your experience in Brazil!


What you need at this moment? You need the solution for solving the data loss problem and rescue your precious memories. Get uFlysoft studio solution now!


This summer, uFlysoft studio-data recovery software protects your digital data and be with you during the whole tutorial of the World Cup.



Let uFlysoft Studio Data Recovery Protect Your Memories in This Summer


As this article said above, some (perhaps most) data loss situation may actually be caused by human wrong process.

There is one thing which is very important you need to keep in mind after you meet the data loss situation: Don't use the device which the files were lost from. If you keep using it, you may cause the data overwritten situation and once this situation happens, you may lose the chance of getting back your files.

Now, I will explain why the data overwritten situation will make you fail to recover your files and the how to perform lost file recovery process.

First thing first, the data overwritten.

In a simple way to explain this to you. You have a file which name "File A" on your flash drive. When you delete it or format your flash drive, the system will not really delete it. The system only frees up the space which was belonging to "File A" so that this space can be used by other new files you may put into this flash drive later. At this moment, you still have a chance to recover your files. If you put a new file which is named "File B" into this drive, the "File B" will take the space of "File A". This is the so-called data overwritten situation. Once you meet this situation, the probability of file recovery will be reduced.


The second thing, how to recover your files.


This is the time uFlysoft Data Recovery needs to stand out. With features which uFlysoft data recovery offers, you can get the precious memories back which you got this summer.


Lost File Scanning Options: More advanced users and those finding themselves in particularly severe data loss scenarios will find the "Deep Scan" feature more useful. This is the more exhaustive scan as opposed to the basic "Fast Scan" method which typically takes a maximum of ten minutes on most systems.


uFlysoft Data Recovery not offer the fast scan but deep scan feature - This will thoroughly scan the drive sector-by-sector although it can take a few hours on today's often enormous hard drives.


Recoverable File Preview Options: Another useful feature is the particularly reliable and user-friendly user preview. When you are scanning a drive for recoverable files, you will not be able to see the original file names. This is not the fault of the recovery software – it is due to the fact that such information is permanently deleted by the directory system when the file is deleted either by emptying the Trash or by formatting the drive. However,using uFlysoft Data Recovery's built-in preview feature, you will be able to preview many types of photo files to see if they are the ones that you are looking for.


Reliable Data Recovery Function: With versatile file system and hardware compatibility, uFlysoft can recover data from any hard drive with any file system installed, making it an ideal solution for those looking for a reliable file recovery solution.


So just come to our official website uFlysoft studio to get more information about data recovery now.

Perform Mac Lost Word Document Recovery in Simple Way

In the last article our official site I’ve listed the problem which we may meet when we use the Word document. Since I am a Mac user, now in this article I will share the experience about how to recover Word document on Mac in simple way.


Have you ever started a new Microsoft Office Word (or the Excel and PowerPoint file) and been getting pretty far along when you accidentally close the document before saving it (or lose power and the computer shuts down, etc.)? Here is a helpful little tip which I summarize for any of you out there that happen to find yourself in the situation. Take this tips, keep in mind and try to success in Mac Word recovery.


In my case, I was building a Word file and went to go delete a picture of the five which I put in the Word file and just after I clicked the “confirm” box, realized I just confirmed to close my whole Word without saving it, not just to delete my single picture. Ouch!


Of course I can put the picture inside it again. But I only got the only one copy of this picture and I just deleted it and clean up the Trash Bin, (Take this note: Build a backup for all of your files is necessary no matter how self-confident to promise you will not lose any of your files you are.) I know what you may say, I know, I know… Save, save, save as you go. Usually I do but today I didn’t. So now what? Actually you can save your Word like before my using the normal way or depend on the data recovery tools. Now let’s check out the normal way first .



Solution for Performing Mac Word Recovery


Microsoft Office has a fantastic feature built in where it can help you in Mac Word document Recovery such as save the unsaved files (just in case you do what I did)! Now in order to use this feature, you will need to have Save AutoRecover information… and Keep the last autosaved version if I close without saving enabled inside Microsoft Office. (If you’re not sure if you do, I have included the steps to enable this at the bottom of this post).


Here are the normal way to take which can help you in the Mac Word file recovery, even the Excel or PowerPoint (Here I use Microsoft Office 2010 as an example) if you inadvertently close it before saving it.


1. Press the “Command-N” keys together to open a new Finder window on the Mac’s screen. In the left pane, under devices, choose the entire computer as the location to search. Enter “AutoRecovery” in the text field next to the “Searchlight” icon in the upper right corner of the window.


2. Select the file you want from the list of files returned by the search. The names of auto-recovered files begin with “AutoRecovery save of” followed by the same name as the Word document that was lost. Click on the file and drag it out of the search window and onto the desktop.


3. Close the Finder window.


4. Double-click on the recovered file on your desktop to launch Microsoft Word and display the file on the screen.


5. Click on the “File” menu. Select “Save As” from the drop-down menu. Type a new name for the file into the “Name” field at the top of the dialog box that appears on the screen.


6. Select “Desktop” or some other location to store your file from the “Locations” drop-down menu in the center of the dialog box. Click the “Save” button.


This is the steps what you need to finish the Mac Word recovery task. But what if this normal ways does not work? I think you may need the data recovery tools to help you a lot. So just go to our official website uFlysoft studio to get the apps which can help you a lot.

Achieve Mac Lost or Deleted Data Recovery Process in Simple Way

Did you delete the Word document, or any other files like excel files or emails which are related to your work from your Mac OS X hard drive and empty the Trash Bin? Later you realized the importance of the deleted files, but unable to get them back Well, this is a pretty common user’s mistake, which causes critical file loss situations for a number of Macintosh users.



What to pay attention to after Mac file loss happened?


When you meet the file loss problem, here are the thing you need to pay attention to:


Stop working on your Mac machine immediately after you realize the file loss.


Continued use of the Mac computer increases the chances of file overwriting significantly. Keep the following things in mind while trying to recover the lost files:
If the files are deleted and Trash Bin is not emptied, you can drag the files out of Trash to desktop.


If you emptied Trash Bin folder after deleting the files, it needs third-party tools to recover the files.


If the Trash Bin is emptied using the Secure Empty Trash option in Mac OS X 10.3 Panther and later versions, the files are not recoverable.


Determine the background process when you empty Trash Bin.


Click ‘Empty Trash’.


When you choose this option, Mac OS X operating system removes directory entries of the hard drive for tiles, instead of the files.


Understand that after deletion, the disk space occupied by the deleted files, is set as available and can be used by other files.


You can recover the deleted files until they are being overwritten by other files.


Do not continue using the system.


If you keep using the system after deleting files and emptying Trash Bin, you greatly increase possibilities of file overwriting with the every minute which passes. For assured recovery of lost, missing, and deleted files from Mac OS X hard drive and other supported storage media, use third-party Mac data recovery applications to recover data on Mac.



Choose the suitable Mac data recovery software


Actually you can take your Mac to the repair shop, but some bad guys will steal your private info or account which are stored on your Mac. So, the safe way is to use the third party data recovery software for your Mac. But make sure one thing: No matter which software you choose, make sure it only do the read operation on your Mac but not the write process ’cause if the software does the write process on your Mac, it may make your file lose again. Keep this in mind to guide you to choose the perfect software for solving Mac data loss problem.



Tips for Users


No matter what software you are using, no matter how exciting you are when you get the lost files back, make sure build a backup this time to avoid data loss situation. You can visit other posts on our site http://www.uflysoft.com if you need to learn more about recovering Mac lost files.

Reduce the Risk of Data Loss on Your USB Drive

You know what sucks? Putting your resume, portfolio, essay, photos, whatever, on a USB stick, bringing the stick to the print shop, and discovering that your data is dead. Don’t let it happen to you. Now here bring you this article to show you the method you may need to protect USB drive from data loss or recover lost or deleted data on USB drive.



Patience


The most common reason USB flash drives get corrupted is impatience. I often refuse to wait to eject flash drives, and I know I’m not the only one. (In my defense, I also tend to make sure nothing critical is only on a flash drive, and you should too.) Drives get corrupted when you don’t safely remove them because of something called “write caching.” Essentially, write caching is a feature that improves write speeds. Rather than writing each request as it is received and forcing you to wait, your OS will cache these requests, and fulfill all of them in one fell swoop. When you tell your computer to safely remove or unmount your flash drive, you essentially warn the OS that you’re going to remove it, so it writes all requests in its cache to the disk, and tells all background programs to stop accessing it. If you don’t wait, you could have items waiting to be written to disk, which could result in a corrupt filesystem.


As for format, I personally prefer ext4 for my flash drives. For Windows, I would say go with NTFS, as ext4 tends to cause problems in Windows. NTFS supports large files and journals, so it will work pretty well. Filesystem is largely a personal choice, and typically anything that is less prone to corruption is also going to be significantly slower. ZFS is becoming popular, though I don’t know whether that works on Windows, and I don’t know whether it can be put on a flash drive.


In terms of brands, I don’t find a large difference in quality from one to the other. Some have better protection for the connectors, some certainly feel less “flimsy” (although, surprisingly, I’ve found that the flimsy ones break less often). I usually just use whatever is cheap. You should recognize that nothing important should ever be kept solely on flash memory. USB sticks are too easy to lose, step on, or drop into the toilet, etc. Important data should be backed up and kept on at least two distinct drives, and preferably in at least two separate physical locations (think fire risk, flood risk, etc).



Filesystem Rules


If you only use your flash drive on one operating system then use the same filesystem that is on your computer.


Windows: NTFS


Mac OS X: HFS+


Linux: Several options. If you use your drive on multiple operating systems you need to use FAT32 because it’s the most compatible filesystem, and also the most unreliable. Any of the above choices are a better option if compatibility is not an issue. Note: if you use Linux and Windows then you can use NTFS for both computer filesystems and your flash drives, but if you use Mac OS X then getting NTFS working is a pain and not worth it.


Technologies: Breakthrough listed some that you could look for, but just about all flash drives today will have these features or some other proprietary alias for them that isn’t worth looking into. In general, don’t spend too much time looking into it. As Seth Curry touched on, redundancy is always the better answer for keeping your data safe. Any storage device can and will fail eventually, so you don’t want to get comfortable with one solution.



Portability vs. Integrity vs. Speed


What can be done to reduce the chance of filesystem corruption and dataloss on a single USB drive? Commonly used filesystems like FAT32 or NTFS don’t store any data validation information (only on the internal filesystem itself). Keep backups of your data, validate the data with checksums (you can generate MD5/SHA1 hashes for your files only to check if any data has been corrupted), and/or store recovery archives. And lastly, regardless of the filesystem, you should always properly unmount the drive. This ensures that any existing file reads/writes are completed, and any read/write buffers have been flushed.


Which filesystem is the most robust? Robustness comes at a price—compatibility. Arguably, you’d want a filesystem with built-in data validation and checksumming (or redundant data) like ZFS, but that isn’t very portable with Windows/OSX. If performance is a concern, you might want to try exFAT, which appears to be supported in most major operating systems out of the box or with some slight configuration.


Which technologies or labels indicate that USB sticks supporting them are less likely to become corrupted? Anything that keeps flash memory alive longer, most notably wear leveling and over provisioning. If the drive supports wear leveling, a larger drive will keep more available sectors in the case some wear out.


At the end of the day, flash memory doesn’t last forever. All current flash memory has a limited number of read/write cycles, which inherently causes data loss over time. You can mitigate this risk by taking regular backups, and validating your data with checksums to determine when a file has been corrupted.


It’s also possible to use a filesystem with built-in data integrity and recovery, but these are uncommon in many non-UNIX environments as of writing this. They also may be slower and actually wear out the drive faster, due to the requirements of storing additional checksums and redundant information for each file. For each case there’s a solution, you just need to weigh the portability/integrity/speed considerations.


For more details you can visit our site uFlysoft studio to get more articles about protecting USB drive data.

Efficient Way to Perform Mac Lost Data Recovery

Situation You Need to Restore Mac Files


There’re tons of situations of Mac files loss in the world, here we choose the “big two” for you to learn and then get a good way to perform Mac lost data recovery easily, now let’s check it out.


One of the most common reasons that Mac files loss occurs is related to the carelessness of the Mac users. An external backup is always essential to preventing data loss. Consumers can buy tools that have incremental and differential backup options. If the data is truly important it is idea to back up on a daily basis. This is the best way to be assured of data loss prevention.


Another common reason that data is lost has to do with the lack of preparation in recovery. There may be times when you do not have the resources to do a full daily backup. This may incidentally be the time that your computer crashes. In this event a “recover lost file on Mac” action is crucial.



Efficient Way for Mac Lost Data Recovery


In our daily lives, when we meet the Mac files loss situation, we will think of the repair shop first. Yes, it can help us a lot, but it take us a lot at the same time-lots of time and much money.


So why don’t we get back the lost files by ourselves? If you lose your files on your Mac, don’t panic. The first thing you need to do is to check the Mac Trash to see if your files are moved in it.


And if you have built a backup for your files, it may help you to get back the lost files at once.


But how about you neither find the files in the Trash nor you build a backup for your files? If you meet such a bad situation, you’d better don’t touch your Mac, which means don’t use it for a while. Because if you use it, you may write new data in the Mac hard drive or your old data will be overwritten by the new data, which means you may not get back the lost data forever.


At this moment, you can have a try on a Mac data recovery program to restore the lost files by yourself.



Features of uFlysoft Mac Data Recovery Program


As a powerful Mac data recovery program, the features are listed below it must have.

1. The software can recover lost/missing logical drives.


2. The software is possible even after the formatting of your hard drive.


3. You can easily recover lost files and folders using this recovery software.


4. Easy to use. (This is very important, if it is difficult to use, who will pay time on it?)


5. Complete hard drive data recovery ensured. You can recover documents, music files, photos, videos and other data items. Recovery is possible from hard drive, USB, Zip drive, floppy drive and other such media.


To solve your problem, here we suggest you to have a try on uflysoft Mac Data Recovery software , a recovery program which satisfies the conditions above. Without further ado, let’s follow the easy-to-use “3-steps” operation to get back your lost files with ease.


  • First of all, install uFlysoft Mac Data Recovery on your Mac.

  • Secondly, launch the program. A dialog box will pop up and guide you to use it. You just need to choose your hard drive and start scanning. The program will scan your camera deeply to find your lost files. (If you want to recover lost files from your store device, just connect it with your Mac and scan it.)

  • Finally, click “Recovery” after scanning is finished. And you will find all the file come back to you again just in a few minutes.


  • Tips


    1. Remember, do not save the recovered data on the drive which your lost data were store before or you may lose them again.


    2. If you want to get more details about data recovery, check out our official website: http://www.uflysoft.com

    How Do FBI or You to Recover the Deleted Data on Computer

    What you do on your computer stays on your computer.


    That may seem obvious, but a document in a new FBI terrorism case provides fascinating reminders of just how much information government agents can mine from your computer and other electronics, revealing cyber secrets you thought you’d long ago deleted.


    Jamshid Muhtorov is a refugee from Uzbekistan who was living in Aurora, Colo., until his arrest on Jan. 21. The FBI began investigating Muhtorov last year for his support of the Islamic Jihad Union. The group is designated a foreign terrorist organization by the U.S. government and has claimed responsibility for multiple attacks on coalition forces in Afghanistan.


    Muhtorov allegedly pledged money and his allegiance to the IJU, emailing a representative of the group that he was “ready for any task, even with the risk of dying,” according to the criminal complaint. He was taken into custody at Chicago’s O’Hare airport just before catching a flight out of the country.


    In an affidavit, FBI Special Agent Donald Hale noted that Muhtorov communicated with associates using two email addresses, an Android Blackberry smart phone and a Sony Vaio laptop computer that Hale suggested could yield a bounty of information.



    When “Delete” Does Not Mean Delete


    “Computer files or remnants of such files can be recovered months or even years after they have been downloaded onto a storage medium, deleted, or viewed via the Internet,” Hale wrote in the affidavit. “Even when files have been deleted, they can be recovered months or years later using forensic tools.”


    Hale explained that when a person deletes a file on a computer, the data doesn’t actually disappear, but remains on the hard drive until it gets overwritten by new data. The computer’s operating system may also keep records of deleted files in something called a “swap” or “file rescue”.


    A computer’s internal hard drive can keep records of how it was used, who used it, and when, Hale wrote. This digital evidence can point to information that once lived on a hard drive or memory stick, but was later altered or deleted. For example, agents might even be able to see where an incriminating paragraph was erased from a word processing document.


    “Computer users typically do not erase or delete this evidence, because special software is typically required for that task,” agent Hale wrote.


    The trail doesn’t end there. Web browsers, email and chat programs can reveal online nicknames and passwords. The computer can also tell investigators when a memory stick or external hard drive was connected, and how and in what sequence files were created.


    Analyzing all that electronic evidence, Hale wrote, takes “considerable time.”


    That work gets done at one of 16 computer forensics laboratories around the country run by the FBI, in partnership with 130 state and local law enforcement agencies. The first Regional Computer Forensics Laboratory, as they are officially called, was established in San Diego in 1999.


    Agents who first obtain court approved search warrants can scour cell phones, cameras, GPS units, tablet computers and more for information that can make or break an investigation.



    Digital Detectives


    “The analysis could directly implicate or eliminate the suspect based on the information recovered, or serve as corroboration or contradiction to a suspect or witnesses statement,” said FBI Supervisory Special Agent Sean O’Brien, director of the Rocky Mountain Regional Computer Forensics Lab in Centennial, Colorado.


    In the 2010 fiscal year, the regional laboratories conducted 6,564 examinations of everything from hard drives and cell phones to floppy disks and VHS videotapes. During that time examiners combed through 3,086 terabytes of data. (For comparison, just one terabyte is equal to about 1,000 gigabytes.)The digital deluge can be overwhelming.


    “The sheer volume of information investigators request to be analyzed exceeds the capacity of forensic examiners available to analyze the data in the laboratory,” O’Brien told ABC News.


    When two Roy, Utah, teenagers were arrested last week for allegedly plotting an attack on their high school, their computers were sent to be analyzed at the lab in Salt Lake City, according to FBI spokesperson Deborah Bertram.


    The Rocky Mountain Regional Computer Forensics Lab played a key role during the 2009 investigation of Najibullah Zazi, who later pleaded guilty in a plot to trigger bombs on New York City subway trains. Analysts searched for evidence on several computers, helped execute search warrants, and examined surveillance video that showed Zazi buying bomb making ingredients at a beauty supply store.


    Feel the recovery seems very complicated? Maybe yes, maybe not. Why? Because the FBI’s method and technology is the secret for many normal users like you and I. But more articles on our official website will offer you the simple method to restore the so called “deleted data”, go and get more by clicking uFlysoft studio.

    Guidance for User to Purchase the Right Mac Data Recovery Software

    There are many choices of data recovery software for Mac owners so it can be tough to pick the right one. It is a good idea to have data recovery software at hand at all times, just in case you find yourself in a situation where you really need it. This can save you a lot of stress in the future. Mac OS X does not provide any native recovery software and instead provides the Trash folder as your last line of defense.


    Once you have emptied out the Trash folder, you may think that your files are gone for good. There are also many other situations where you will need to fall back to data recovery software in order to get back what you've lost. If, for example, you have accidentally formatted the wrong disk or partition or you lost data due to a malicious software infection, the only way you will be able to get the files back is to use special software for the job.



    Why We Could Recover Lost Data


    If you're wondering how this could possibly work, it is actually quite simple. When a file is deleted from your Mac's hard disk or from other media such as a flash memory card or USB drive, only the name and address of the file is deleted by the file system. The file system marks the space as available, so anything else can permanently overwrite it at some point in the future. In reality, however, this rarely happens very quickly and sometimes people have been able to successfully recover data on Mac intact which was deleted weeks or even months before. However, you should not bet on this and it is wise to turn to a data recovery solution as soon as possible. Even if you do not need such a solution right now, it is always vigilant to have it available.



    What to Look For


    Not all data recovery software does exactly the same thing. Some programs are more user-friendly than others. Some are more reliable than others while the professional-quality solutions perform brute force scans of your entire hard disk, giving you the best chances possible of successfully getting back what you've lost. There are various essential elements to consider when it comes to choosing the right solution for your requirements.


    Supported File and Storage Device: The first thing to think about is which type of files the data recovery software can recover. Does it support flash drives formatted using the FAT or NTFS file system, for example? Or, does it support Word, Excel document? All data recovery tools for Macs support Apple's proprietary file systems-the HFS and HFS+ systems. Many solutions also support iPods, iPod Touch and iPads.


    Scanning Options: Certain types of data recovery program are specialized at recovering different file types although the more sophisticated solutions should have no difficulty in recovering files of any type. This is particularly the case with programs that provide a deep scan feature. A deep scan is a useful option since it thoroughly scans the disk on a sector-by-sector basis, locating deleted and lost files by content. All data recovery software takes a long time to perform such a scan-typically a few hours on a large hard drive.


    To make sure you can recover missing files from Mac, we suggest you to have a try on uFlysoft Data Recovery for Mac, no need technical skills, just a few clicks job, then you will get back lost data easily. Follow the guide on the friendly interface to perform it.



    Tips


    For those who are using Windows OS such as Windows XP, Windows 7, we uFlysoft studio offers you the professional photo recovery software-uFlysoft Photo Recovery for Windows to get back photo files even audio and video files with ease. If you need it, just come to our official website uFlysoft studio.

    How to Recover Lost Files on Mac OS PC

    It’s happened to us all: deleting a file, folder or entire disk, then realizing that you’ve made a mistake. You reach for your backup-and you don’t have a backup. What now?


    There are several deleted data recovery tools available to help user to recover deleted files on Mac OS PC. Your chances of success depend on how the file was deleted and what you’ve done since then. Unfortunately you will also lose your original filenames, though some reconstruction is possible.



    Deleting, Erasing & Partitioning


    On the Macintosh moving a file to the trash, then Emptying the Trash, deletes the item. When you delete a file or folder you remove the entry for that item from the disk directory. Immediately after deletion the data still remains on the disk where it was but the directory says “that space is vacant.” As long as you don’t write anything new to the disk, recovery is usually straightforward.


    If you accidentally delete something you need, if at all possible stop using the affected disk immediately.


    Another way to delete a file is to use Apple’s Disk Utility to erase a drive. By default Disk Utility does a Quick Erase, which just deletes the disk directory and replaces it with a new empty copy. The underlying file structure on the volume is not changed, and any existing data remains in place until it gets overwritten.


    Partitioning a disk removes all existing volumes on a device, then creates new ones with new disk directories. However like a Quick Erase, Partitioning doesn’t actually remove underlying data, it just marks the space as available. File recovery is usually possible on re-partitioned drives, though this will require a more thorough scan than with a standard erase.


    A Secure Erase-typically a multi-pass process-writes new data to the disk and is deliberately destructive to old data. The utilities described here will not work if a Secure Erase is performed on your disk, recovery will require a forensic data recovery service.



    Undeleting Files


    All Undelete utilities require use of a separate recovery disk to which are copied recovered files. The recovery disk needs adequate free space for the expected amount of data. A hard disk, flash drive, another Mac in Target Disk Mode, or even an iPod, can be used to store recovered files.


    There are a number of utilities available for this task, the one I’ve relied upon most is uFlysoft Mac Lost Files Recovery Tool for any types of files which you want to recover after losing them.


    uFlysoft studio offers the software is easy to use and no need so many technical skills, all you need to do is to follow the guide which is shown on the friendly interface. So just come and have a try on it.



    For Windows OS User


    For the user who is using Windows OS such as Windows XP, Windows 7, we uFlysoft also offer you the powerful deleted photo recovery software-uFlysoft Photo Recovery for Windows to recover lost media files on your computer easily. Check more data recovery information on our official website: http://www.uflysoft.com

    Rescue Lost Media File on Your Mac with Ease

    Photos keep fantastic memories such as vacations with your friends, special family party and more good time of your live. However, when you rely on the digital photo completely for saving your photos rather than stored them by printing them out and save in the traditional photo album, there is still chances of losing them. Perhaps you have accidentally deleted a whole collection of photos from your hard drive or other storage device having assumed that they were safely backed up elsewhere. Perhaps you formatted the flash memory card where they were stored or perhaps something went wrong with your digital camera or other external storage device which caused your photos to miraculously disappear. Fortunately, there is photo recovery software out there which can help you to get back the media files on Mac that you’ve lost and, while levels of success vary greatly, it is usually worth a try.



    Features to Look Out For in the Best Photo Recovery Software


    As is the case with any type of software, not all photo recovery software is made equal. Some solutions are less reliable than others while some may take a prohibitively long time to scan a large hard drive. Some programs have a range of extra features such as disk imaging. Other support a particularly wide range of formats. However, there are also some things that any worthwhile photo recovery software should have, as explained below.


    A photo Preview Feature


    When deleted data is discovered after using photo recovery software to scan the storage media, you will need to use a photo preview feature to be able to recognize the files that you want to recover. This is because the original file names will no longer be there since they are permanently deleted when the file is removed from the file system. You will only be able to identify deleted files by their actual contents, file size and file type.


    Storage Device Support


    Any photo recovery software should support not only internal and external hard disks, but also USB flash drives, memory cards, built-in digital camera memory and even other, older storage devices such as ZIP or JAZZ disks. Anything which has a file system supported by Windows should work, except for re-writable optical disks which are not quite so commonly supported for data recovery.


    Format Support


    Any photo recovery software should support the standard image file formats used by digital cameras. The most common format is the compressed JPG format which is widely used on the Internet. However, high-end digital cameras used by professionals may also save images in their own proprietary RAW format (high-quality and lossless compression formats). Ensure that the photo recovery software of your choice supports the format used by your camera.


    Read-only Scanning


    The more the contents of the media is change, the more likely you are to permanently lose any deleted data contained on it. For this reason, you should never run any kind of data recovery software from the storage device you are trying to recover data from. If you are trying to recover data from your one and only hard disk, you will need to have a program which can be run from a bootable disk. Scanning for deleted files should not make any modifications to the media being scanned.


    In addition to these standard features that any recovery software should have, you may also want to consider the following options depending on your situation.


    Disk Imaging


    A disk image is a bit-by-bit exact copy of a storage device. Some of the more sophisticated photo recovery programs include such a feature. This is useful for backing up the contents of a disk or for taking an image of damaged or corrupted media. You can then attempt to recover deleted files from the disk image itself rather than the original media. This can be more reliable and accurate in such situations.


    Audio and Video Support


    Most photo recovery solutions can also recover audio and video files of common formats. If, however, you want to be able to recover files of any type, then you will need a complete data recovery solution. Many developers of photo recovery software also provide such solutions albeit at a higher price tag.


    Other Considerations


    Price is, of course, a major consideration for many people. While there are free photo recovery solutions, they are few and far between and are generally not up to scratch. Since most people seeking data recovery software are already in need of it, developers, unsurprisingly, tend to exploit this sense of urgency and price such software quite steeply. Prices for photo recovery software typically range from around $30-$50 for a single user license. However, most providers also offer a free trial edition which will at least allow you to scan the media containing the deleted files and see exactly what you can recover. To recover any significant amount of data, however, you will usually then need to register the program. Some trial editions allow you to recover a small amount of data, such as one megabyte, for free, however. Full data recovery software which can recover files of any type (not just photos, audio and video) tend to be considerably more expensive.


    Another consideration for many is technical support. Many companies only offer technical support by email to those who have paid for the program, although some companies do offer support by telephone.


    As we have tried lots of software, Photo Recovery for Mac is the good quality one which fit for most of the requirements above. So in my opinion, I will suggest you to have a try on it.



    Something Need to Consider-What the Photo Recovery Software Cannot Do


    Before you get your hopes up too high, it is important to realize that photo recovery software, like any data recovery solution, cannot work miracles and it is, ultimately, a game of chance. Although some programs do come with a money-back guarantee, no photo recovery software is able to recover all files in all situations. If you have used the disk containing the deleted files since the files were deleted or the disk was formatted, it is extremely likely that some of the original content will be overwritten. If this is the case, there is no chance of successfully recovering all of the data. In short, photo recovery software is absolutely worth a try, but the levels of success can still vary greatly regardless of the program you choose.


    For more details you can go to our official website http://www.uflysoft.com to get what you want to know.

    Offer the iOS Device Data Recovery Software for Users

    As an iPhone or iPad user knows, it’s all too easy to accidentally delete information from your device simply by touching the screen the wrong way.


    Fortunately, data recovery is possible because when you delete files from your device, the data actually remains on your unit until you add new content that then writes over then old, deleted data. Therefore, until you add new content, you are still able to retrieve your deleted files. And once that data is gone, it’s gone for good-unless you have the iPhone File Recovery Software Mac/Windows Version, a $100 program (free feature-limited demo) that proved capable of recovering lost data from iOS devices … some of the time.



    Easy to Use & Powerful Feature


    The iOS data recovery software is simple to use. Downloading the application is easy, and it took only a few minutes to install it on our machine. This software (with separate versions for Windows and Mac) works with all iOS devices. It can recover data directly from the iPhone 3GS and iPhone 4, the iPad series, and the fourth-generation iPod touch, and it can regain data from an iTunes backup of all other iOS devices, including newer iPads, the iPhone 4S/5/5C/5S.



    How Does It Works for You


    Once you have installed the software you just have to connect the iPhone to the computer and start the scan. It’s really just that simple. We were able to recover all of our previously deleted files without any issues. The fact that we were able to view the files before restoring them was a big help, since there were some files we no longer needed.


    This iPhone file recovery program will recover 12 different types of data from your iPhone, iPod or iPad. We were able to recover lost images and videos that were stored in our Camera Roll, as well as message attachments. It will also recover audio files that are located in your Voice Memos folder.


    One of the most devastating issues that can happen when your device has crashed is that you lose your calendar and recurring reminders, and losing your contacts can be especially painful. And don’t even get us started on the pain of losing your notes and messages. However, the iOS recovery tool successfully retrieves all of that lost data, so you won’t have to spend time re-establishing your iPhone settings.


    This software can also recover lost data by using the last iTunes backup or sync that you performed. However, this is only useful if you’ve synced to iTunes recently or if you’re hoping to recover older files.


    Note: The “Try it for free” button on the Product Information page takes you to the vendor’s site, where you can download the latest version of the software appropriate to your system.



    Final Though


    Accidents are inevitable. You mistakenly delete a string of text messages that contain vital information on your iPhone, or your iPad is destroyed after you drop it on the ground. Life happens. However, with this iOS data recovery software, you won’t have to worry about losing all of your important data. This simple data recovery software for your Apple devices allows you to reclaim any lost data, avoiding the hours and frustration it would take to rebuild your smartphone’s setup.


    But the backup always the golden rules to protect your files away from the data loss problem. For iOS device you can back up your files through the iCloud. And, if you are using Mac, our site http://www.uflysoft.net can offer you more you need to know.

    Use Powerful Data Recovery to Perform Mac Photo Loss Problem

    Questions about Mac Photo Loss


    Q1: What are the reasons for the loss of photos from Mac?


    Q2: Is it possible to recover the lost photos from Mac?


    Q3: Is any Mac photo recovery application capable in the recovery of lost photos?


    Q4: Does the original quality of the photos get altered if recovered?


    These questions might be asked sometimes when the photos lost happen. What make these happen? There are tons of reasons such as unexpected MacBook powerful off, file system corruption, media corruption or damage, deletion of files accidentally, if you have performed formatting error message, etc.


    So this becomes important to recover all the lost or deleted photos that have taken place because of all these problems.



    Mac Photo Recovery Application


    In all these situation above, you may need the method to perform photo recovery operation for your Mac. We discuss lots of situation at many places how to judge a recovery program is fit for you or not. Here we only tell you what a good program should have.


    Well, the suitable software should be capable in the recovery of all the deleted and lost photos from the Mac hard drive, Micro Drive, memory stick, SD card, XD card, MMC Card, Zip disk, Mini disk, digital card, and Macintosh based hard drive.


    With the help of the powerful photo recovery software you can recover all the formatted, deleted, lost digital photos and images on the removable media that is also after the media corruption and formation and accidental deletion.


    What’s more, this software works with all the type of storage media and digital card reader. At first this program shows all the images that are found and then allow the recovery of all. The photo recovery software for Mac is helpful in the recovery of the lost photos of the following cases:


    ●Provides photo recovery after Mac hard drive has been formatted.


    ●Provides photo recovery after the corruption occurred due to suddenly turning the Mac off while it was still on.


    ●Provides image and photo recovery even after storage media formation.


    ●Recovery is possible even if the data has been lost because of using media in between different camera.


    With it, all you need to do is follow the easy 3 steps to achieve photo recovery. Why only 3 steps? Actually, most of the recovery programs in the market will help users to make the recovery process become easier, so they always work in the similar way like below:


    First thing first, install the software which you choose on your Mac. (Be careful, don’t install it on the path where your lost files were stored before or the installation will cause the data overwritten situation.)


    Secondly, launch the program. An easily understood dialog box will pop up and guide you to use it. You just need to choose the path where your lost photos were stored before to scan. The program will scan deeply to find your lost photo and you can preview the found result (If the software offers the preview function).


    Finally, click “Recover” after scanning finished. And you will find you perform Mac photo recovery successfully just in a few minutes.


    Here is the easy way to use the software to perform photo recovery for your Mac even other storage devices. Just remember choose the right and safe software for your computer and files safety. Or you may also go to visit our official website uFlysoft studio get more details.

    What is Data Loss and How to Slove This Problem

    If your business relies on computers, as most today do, you probably have concerns about data loss. Whether caused by hardware failure, human error, theft, or a computer virus, this loss can be costly. This is why it’s important for you to establish a prevention system at your business to lower the risks of information loss. Then, how to solve data loss problem with ease? This article will show you the answer.



    The Dangers: Loss of Unique Information and Financial Costs


    According to the data recovery company DeepSpar, “hard drive failure is the most common cause of data loss” and accounts for 38 percent of these scenarios. This loss can be detrimental to your business. If you lose financial reports, client information, or systems that are unique to your business, you can be down for days. Once this information is lost, data reconstruction becomes a priority.


    The rebuild takes employee time, and can delay other projects and network updates. DeepSpar estimates that an IT specialist who recovers lost data for eight hours costs the company about $350, assuming the in-house employee makes the national average wage.



    Data on Mobile Devices


    With all of the information we store on smart phones and tablets, mobile device data loss is becoming an even bigger concern. Whether the devices are company-owned or employees use them as part of a bring your own device (BYOD) policy, the loss can be detrimental. When an employee uses their mobile devices to access company systems and third-party applications, there is a lot of business information on these devices. If the phone or tablet is lost or stolen, this information could end up in the wrong hands.



    Prevention: Have a Backup Plan


    A backup plan is key to your business data protection strategy and encourages you to store data in a separate, safe location in case the original data is damaged or lost. Often times, the backup is stored offsite in case there is a natural disaster or burglary at your office.


    Updating data frequently is also strongly advised. Updates can be done as often as daily or as infrequently as quarterly, depending on your operations. It is also important to do periodic testing of the data to ensure it is viewable and accurate. This can help prevent loss in case the backup becomes corrupted.


    In addition to the offsite backup, it is recommended to have a third backup somewhere else. This can be done with a trusted online cloud service. In addition to keeping your information safe, you can also enjoy the benefit of being able to access it anywhere you have an internet connection.



    Access Levels


    It is important to have your IT team set data access levels outlining which employees can access any data on your network. It is also a good idea to develop a confidentiality policy for employees that restricts their usage of your company data. Employees sign the agreement when they start working for you; you can set up any consequences for breaking this policy to help enforce it.



    Data Encryption to Protect Against Losses


    Don’t limit your data protection plan to just desktops and laptops around the office. It should extend to tablets, smart phones, and even apps your employees use on your company network. How you do this depends on the type of data you’re protecting. Over-the-air encryption protects company data that is in motion between employee devices. A common example is Secure Sockets Layer (SSL), which protects data that transfers over Hypertext Transfer (http) or the Internet Protocol.


    SSL creates a secure session between the desktop or mobile device and the company server. Your server has an SSL Certificate with public key and private key; public key encrypts the data and private key deciphers it. The encryption creates a safe session for the user without risk of manipulation of the data.


    At-rest encryption applies to the encoding of data that does not move on networks; the data does not move off the device itself. An example is password protection. Use a different password for each major service so that if a virus compromises one account it does not affect the others. A password generator is useful for suggesting strong, unique strings of characters.


    In-use encryption is the third main type and protects in-process data, whether it is in the process of creation, deletion, upload, or another action. Secure the data against human manipulation or error by controlling access to the memory. With the encryption, the only retrieval of information is from its at-rest position and users must have company authorization to access it.


    There are steps you can take to prevent data loss within your company. For more details about data loss solution, you can view more articles on our site uFlysoft studio.

    Data Recovery Software Helps in Mac Data Loss Situation

    Lost files can be a nightmare, and being unsure if things that were deleted will be recoverable makes it quite a bit worse. In this post I got a chance to check out the data recovery software for Mac data loss situation, and it has all the makings of the best little tool I hope I don’t need to use.


    The Data Recovery for Mac is a utility designed to do two things: scan and target your lost files, and then recover them back to you. Any device, local or remote, internal or USB/Firewire that your Mac can see and mount as a drive is fair game for scanning-although be mindful of the size of the disks you choose to scan; as with anything, larger disks take longer to complete.



    How Does It Work?


    After downloading the trial version and then drag it to Applications, you start the Data Recovery for Mac, the interface is almost too simple. I thought I was missing something when the option-yes, the one option of Scan Now-was the only button available.


    Note: In the trial, recovery is not available, but regardless of version, the scanning stuff is extremely straightforward.


    Simply select a disk to scan for lost files in the left hand column, tell the application if you wish to scan only deleted items or deleted and regular items, and click Scan button. Then wait and watch the progress bar slide across the bottom of the screen.


    When the scan completes a list of all the files found during the scan, is displayed with the middle pane of the application window displaying a list of types of files found. When a type is selected, the left column displays all of the files of that type that were found. You can preview if the files you target to recover. (Pay attention, only photo files can be previewed.)



    What about Recovery?


    To recover a file, again paid version only, you simply select the file or files to recover and click the Recovery button. Clicking recovery will prompt you for a location to recover the files and for a folder name. The folder created will contain the recovered files. When the files have been recovered, you will get a pop-up letting you know the process is complete.


    Because the scan of the hard disk took quite a while, when I was able to try recovering a file, there were no external disks attached to recover the file into, so I needed to recover it to a location on the hard disk, which prompted the warning dialog. This is the reason why I really like this software.


    With the warning acknowledged, the software will warn you that you are not able to save the recovered data to the path where your lost files were stored before. This can help you in avoiding the data overwritten situation!


    The experience of using the Data Recovery for Mac was very painless. There was no need to ask for help or look online to figure out how the application worked and what it was all about, and the pricing for the program seems appropriate as well.



    Conclusion-Backup is the King Though You Have This Software


    Backups are great and can be extremely helpful, but they don’t help you go back to the copy that was just removed from the trash. Though the software actually works, but it is not a replacement for backup, but a companion to them. So build a backup for your files is a good idea to protect your files away from the data loss problem. Get more information please go to our official website http://www.uflysoft.com

    Method for You to Solve Mac Data Loss Problem

    Now a large number of PC users are attracted by Mac computer for its distinctive style and much better user experience – a big step of being innovative. No matter you are a user of Microsoft Windows or Apple Mac operating system,data loss is a thing that can’t be avoided. In this high speed society, almost everyone needs a computer to do business, study, make fun, and keep in touch with others and so on. Therefore, a great amount of information has been stored in their computers, like their beloved pictures, important business documents or emails. What if they just have disappeared at the very specific time that you have a need?


    Maybe you just get distracted and lose important things such as deleting important files in your Mac computers. According to certain survey, most of data loss is due to accidental removal of files. There also have some other reasons like system crash, virus attack, hardware failure or power failed while you are working. But you don’t need to worry if you’re Mac users because your files can be recovered even if they are been cleared up from the trash. With the right Mac data recovery software tool you are able to solve Mac data loss problem easily.



    Mac Data Recovery Software Helps You A Lot


    Here the software which I want to discuss is the data recovery software for the Mac user. With all lost data deleted from your Mac computer can be recovered. Its recovery function would revive your lost data and gather all the necessary files that have been deleted accidentally or you just want to restore something in your computer. You might have a doubt of how to recover data that has been deleted from Mac computer. The way is very easy: although data can’t find from the finder; you can’t see it and you are definitely sure you have lost; in fact it is still on your hard disk unless it has been overwritten by new data.


    Here comes a very important thing: stop writing any data to the area where data loss just happened and keep the scene intact. Thus, once you find what you are looking for has been lost. Use the data recovery software for Mac to help you out. It has diverse recovery modules for different causes of data loss.



    Steps of Mac Data Recovery


    Choose the right data recovery software is very important because its function is strong or not can make the recovery process become easy or not. If you find the software which can really works for you then you may follow the 3 steps below. Why I am so sure the software will only use 3 steps? Well, in the market of the recovery software, lots of the program will make the recovery become simple so most of them works in the similar way. Now, all you need to do is to follow the easy 3 steps below:


    1. Install the software which you want to use on your Mac.


    2. Launch the program and choose the hard disk where your lost flies were stored before and start scanning.


    3. After scanning finished, you can preview your lost files (if the software offers the preview option), you can choose which you want to get back and then click “Recover”, you will find the lost data files coming back to you again in a while.



    Tips


    It happy for you to get your lost files back, but why not just keep them save? Build a data backup for your files is a good idea to avoid the data loss happen on your computer. But if you really need the data recovery software because of the data loss, go to our official website uFlysoft studio to get more info you want.

    Take the Right Action to Recover Lost Data from Your Computer

    The worst problem for the computer user must be data loss problem. Imagine how painful if the important files which related to the works or business are lost due to accidental deletion or formatting. Now, this article will show some easy-to-use method to help the user to get back lost files in a simple way. Let’s check it out.



    Easy Methods for Recovering Lost Data


    1. When users delete a file from computer hard drive, don’t panic. The first thing the user is going to do must be checking the recycle bin/Mac trash. If it is lucky enough, user can simply recover this file by clicking “restore”. If not, user can recover it by using a system recovery function. Choose the option to restore the computer the date earlier. Then, the computer system will be back to the date you choose and the user will find the file is still there after restarting the computer.


    2. This is aimed especially at Word or Excel files. If the computer user is using and suddenly power-off, the Word (or Excel) file is not auto saved, user can restart the Word (or Excel), and then a dialog box will pop, find out the file which is not auto save and open it and then save it again. But the most safe way is that the user should set the auto saves option every 5 or 10 minutes so that the probability of data loss will be decreased.



    What If the Data Loss in Worse than Normal Way


    Seems that the above is easy to handle, right? But what if the data loss situation is more complicated? For example, if user format the hard drive, what solution to take to recover the files?


    If users really meet this situation, I suggest two ways: Repair shop or Data Recovery Software.


    The repair shop can offer the professional technical support and help in recovering files easily. And users don’t need to worry about any technical problems ’cause the stuff there will fix everything.


    But in my opinion, I am not so preferring repair shop ’cause sometimes we may store some private information like bank account or personal message on our computer. Few guys in the repair may be the bad guys and they will steal your information. (In rare cases we may meet these bad guys, but who knows?) So, if you decide to choose a repair shop, choose the one which is famous and the reputation is good.


    The second way is data recovery software. Maybe some users think that if they choose this way, the data can be safe. I have to say every coin has two sides. If one user chooses will bring the ads even virus, it also will do harm to the data which are stored on the computer. So, to choose the good quality data recovery software, user should be careful. The first thing user need to consider is if the software comes from a good website but does not come from nowhere. This can make sure it won’t bring the ads or virus.


    The second is that if the software offers the free scan option. This is very important ’cause user can scan the drive or device which the files were lost from to see if the software can find them out or not. If yes, the software can help in recovering files. If not, choose another one.


    The last but not least, the software should offer user technical support anytime. If the customer service can help user timely, I do believe the user would love to use the software.



    Final Though


    At the last of this article, I would like to say no matter which way user chooses to recover files, there is no 100% guarantee that the files can be recovered ’cause there are tons of reasons which cause data loss problem. So, build a backup for the important data is the best way to avoid data loss situation.


    If users still want to know more about lost data recovery solution, visit our home page uFly studio to get more tips.

    Find the Ways to Process Data Recovery after Formatting

    “Few days ago, my PC got some problems and I have no way to fix it. So I have to find someone to fix it. Guess what? This guy formatted my hard drive! All my files are gone and this makes me so depressing. Now I would like to know if any way for recovering files after formatting hard drive? (I mean all of my files which related to my works like word, excel, pdf, etc. They are so important to me.)”


    Have you ever met this kind of problem? Maybe most of you will say yes ’cause sometimes data loss will be caused by our human beings but not the computer itself. But here we are not talking about what make data loss happen, but talk about how to recover our lost data.


    To learn how-how, the first thing we need to learn is that what is data recovery.



    What Is Data Recovery


    Data recovery means using computer technology in a particular way to restore the files which users were losing from Desktop/Laptop hard drive, storage device like an external hard drive, USB drive, memory card like SD card, CF card, TF card.


    This data recovery operation is based on the fundamental of storing files on a device. In our daily lives, people do not know the files still can be recovered even formatting the hard drive or empty the recycle bin. But what we should actually know is that once we make clear how the files were stored on the device and how they were deleted, we will know that the magical data recovery is not so difficult for us to process.



    Storage and Deletion


    When we store files on a hard drive, the system will ‘write down’ the name, the size of the files on the FAT and store them on the free space of the data area and keep writing the content of the files at the beginning on the FAT. And then write the real content of these files on your computer hard drive. Till now, the files are stored on your hard drive.


    Deletion is more simply that storage. When we need to delete a file, the system only make a mark of deletion for this file on FAT to show that this file is deleted, and the space which is belonging to it will be freed up so that other files can take this space. So, when we need to recover this lost file, we only need to use data recovery software to clean the ‘deletion mark’, and then we can get back this file easily. But this is based on there are no new files have been put into the drive which this deleted file was stored before. Once we put new files, as I said above, the new files will take the place which was belonging to the deleted file. This is the so-called data overwritten situation.



    Know More about Formatting


    Data recovery professional always says that if the data have not been overwritten, it can be recovered.


    Because of the character of storing files on a hard drive, when we delete a file, the situation just like I said above-the file is not really gone. This principle is also can be used when we meet hard drive formatting. Formatting sometimes just like deleting files from the hard drive. All the things formatting will do be only free up the space of the files-Not one or some files, but all the files on the storage device.


    And also as I said above, don’t put any new files into the storage device which you formatted it to avoid data overwritten.



    Data Recovery Little Tips


    1. If you formatted your computer hard drive, don’t install the data recovery software on this drive but another computer, and then take your drive out of your computer and find ways to connect it with the computer which install the data recovery software to process the data overwritten situation. This helps in protecting your drive from data over written.


    2. If you formatted your storage device. Stop using it. For example, if you format a memory card which is inserted to your camera, stop taking photo. This is also avoiding data overwritten.


    3. For choosing the suitable data recovery software, users should learn that if the software you choose offers the free scan function first. And, it should offer professional technical support, too. Moreover, it must be not bringing users the ads and the virus which may do harm to the important data.


    4. For more about data recovery information and tips, users can go to our official website uFlysoft studio to get details about solving data loss problems. We are also bringing you the easy video tutorial of data recovery.

    How to Solve Photo Loss Problem on Mac Easily

    Lots of Mac user, like you and I, sometimes due to some reasons may delete the precious photos from our Mac and then find solutions anywhere to try to get the lost photo files back. This problem is what we need to talk today is, “Is it possible to recover the lost photo files from Mac?” Here let me answer your question, “It is actually can recover the lost photo files.” How? Now let’s check it out.


    Easy Solution First


    Let’s begin with the easy situation first. If you just deleted the photos from the Mac hard drive but not include the USB drive or other storage device, it is easy to get the photo files back because if the photo files were deleted from your Mac it must be removed to the Trash Bin. So we just need to go into the Mac Trash and then you will find your files are lying there.



    Solution 2-More difficult to Process


    The above is the easiest way to preform photo rescue. But what about this-If we deleted the important files but we didn’t realize this and clean useless files on our Mac (including emptying the Mac Trash). What should we do now? How to solve this situation?


    To solve the problem, I recommend you to try the Mac photo recovery software.


    Yes, the software can help you a lot to solve your problem but how to choose the software? Here are the features I think a good photo recovery program should have.


    Deeply Recover Lost Photos


    Photo Recovery takes a way to deeply recover your lost photos, videos and audios, recover your photos lost due to accidental deleting, formatting, improper device usage, virus attack, software crash, and other reasons.


    Scan and Preview ability


    Program scans your lost photos before working, and the thumbnail feature can help you confirm if the pictures are what you wanted. Also, the Photo Recovery Mac enables you to check the quality of photos in advance.


    Multiple Formats Supported


    Mac Photo Recovery can recover nearly all common formats of photos, videos and audio files such as: jpeg, png, gif, bmp, tiff, psd, tga, avi, flv, mp4, mov, wmv, 3pg, mp3, wma, wav, ogg, flac etc.


    Safe and Reliable


    Photo recovery uses the advanced algorithm. It is safe enough to recover your lost files without writing to your original data.


    Easy to use and fast


    Program offers you a clear and easy-to-use interface, only 3 steps to let you reclaim your photos, videos and audios easily!


    These are the features are in my wishlist of the Mac photo recovery, what about yours? Just share your opinion on our sites with all of us!


    If you need more technical support for data rescue, just visit more post on our official website uFlysoft studio to get the things you need.

    How to Recover Lost Files from iPhone or other iOS Devices

    It happens in our daily lives normally-when you are using your iPhone or other iOS device you may have accidentally delete some files like the photos or videos. What to do to get them back? Or is it possible to get them back? The answer is definitely yes! But it is based on if the users build a backup on iTunes or launch the iCloud Photo Stream. So let’s take a quick look at these two solution fist.



    Regular Method for iOS Device File Recovery


    Recover Files Trough iTunes Backup


    Precondition: Back up your iOS device files to iTunes already.


    Method: Launch iTunes and callout sidebar, you will see lot of event you can choose. Choose the device you connect with your computer and then click “Restore Backup”. A dialog box will pop up, choose the backup files you already there and click “Restore”, iTunes will process the recovery operation for you.


    Note: In the recovery process you’d better not use your iOS device for avoiding any wrong operation.


    Recover Photo Files by using iCloud Photo Steam


    Precondition: This method requires the iOS device upgrade to iOS 5.0 and above and the “My Photo Steam” must be launched.


    Launch Photo Steam: Click “Setting” → “iCloud” → “Photos”→ launch “My Photo Steams”. Moreover, things still need to do is to click “Setting” → “Camera” → launch “My Photo Steams”.


    Method: After the setting is finished and the iOS device will back up the photos which you take auto to iCloud. You just need to login in to iCloud and you can get the photos back if you deleted the photos you took before.


    Are these methods help you to get lost files back? I think it may help you a lot but the most important thing is that you got a backup already. What if you did not build backup for your files? This situation is complicated and now you may need data recovery software for iOS device to help in recovering lost files.



    How Data Recovery for iOS Device Help You


    To be honestly, iPhone data recovery is difficult because of its closingsystem-iOS. It can protects the iOS device will not be infected with virus or be written. This is good for the users because this can make sure the safety of using iOS device but this makes the recovery process become more harder. However, when there is a problem show up, many of solution will show up, too. Use the iOS data recovery software can help you to recover the lost files with ease! There are lots of iOS data recovery software on the net for you to choose, just choose the good quality one and follow the steps below:


    Step 1. Run the iOS recovery software to scan your iOS device


    Install and run the iOS recovery software on Mac or Windows computer and at the same time connect iOS device with USB cable. Choose ?Recover from iOS Device?. The iOS recovery software will detect and list your device in this mode. Move your mouse on your device and a ?Start? button will shows up. You can click this button to make the software scan your device.


    Step 2. Enter into DEU Mode


    If youriOS deviceis iPhone 3GS, iPhone4, iPad 1, iPod touch, you need follow the below steps to enter into DFU Mode to recover more texts with better quality.


    1. Hold Home and Power buttons simultaneously for 10 seconds.


    2. Release Power button but keep holding Home button(about 15 seconds)


    Step 3. Preview and recover deleted file


    Wait until the iOS recovery software finished scanning the device, you can find all the data found on the your device. All these files are classified and listed in different types on the left. You can choose one to preview. For example, if you only want to preview the deleted text message, you can use the slide button on the right top – “Only display deleted items”. At last, select out and retrieve the deleted texts on iPhone with one click on ?Recover? button.


    All of these steps are easy to handle and you will get back your lost files very easy. Now you must be happy because you can get your files back, but not every time as lucky as this time. Build a backup for the files can help you to avoid data loss problem successfully.


    For more details about iOS device or Mac data recovery you can check our official website uFly studio to get tips you need.

    How to Restore Data on Mac When Data Loss Situation Happen

    While there is no doubt that regularly scheduled data backups are the best defense against data loss, small businesses may encounter situations where it is necessary to recover data from a failed data storage device. Here are a few pointers for SMBs on what to do if they ever find themselves stuck with a dead hard drive or external storage drive.


    How can we recover out lost data if we meet the situation above or other reasons which may data loss happen? Let’s check it out.



    Turn Off the Affected Storage Drive


    The first thing to do to increase the odds of successful data recovery is to quickly power down the affected storage drive. This may be a single storage drive on an external storage device or in a computer, or the hard drive may be part of a RAID volume on a NAS (Network Attached Storage) appliance.


    Powering off the hard drive prevents lost data from being further corrupted in the case of for example, a damaged read/write head or disk platter. It also prevents the lost data from being overwritten by new data. The latter can take place as the result of disk writes by database software or log files on servers, or temporary files automatically created by desktop applications.



    Turn to Data Recovery Process


    There are two situation to do the data recovery for your lost files, check them below:

    The Files are in the Mac Trash


    This situation is familiar to most of us. Only thing you need just a little bit skills of using computer then you must know when the files are deleted, they are not really gone, they are just lying in the recycle. All you need to do is to go to the recycle bin and then drag them back to the place where they were belong to.


    The Trash is emptied or Drive is Formatted


    If you met the situation, you can try the professional data recovery software to process the file recovery operation. Here we will take Mac version as an example to show you the operation ’cause the Mac computer is a little bit complicated than Windows PC. (At lease I think it is.)



    Software May Help A Lot


    How do we know the software which we choose can help us a lot? Well, first thing first, the Mac data recovery program should help you to recover the deleted files no matter what reason make the file lose. And the important thing is that the Data Recovery for Mac won’t do the read/write process. The thing it will do is to rebuild partition in your hard disk so that the data can be saved safe. No matter what reasons make you lose your files such as virus infection or formatted hard drive, you can use this program to get lost files back easily. Follow up the easy 3 steps below to process the data recovery: (Actually most of the recovery software will allow user to process the data recovery in 3 steps because the data recovery process is complicated for many user, so the software make it in the simple way for performing the process.)


    1. Download and install the software on your Mac first but remember don’t install it on the path where your lost files were stored before to avoid the data overwrite situation;


    2. Launch the scanning and target which files you want to recover after the scanning is finished (Pay attention: Only the photo files can be previewed.);


    3. After you choose which files you want to recover, click button “Recovery” and wait for a while (the time you need to wait is based on the files’ size and quantity, if the size is large and the quantity of files are huge, it may take you a long time.).


    It is very happy to get the lost files back, but I do hope all of you no need in the file recovery software. So how to process it? Well, build the data backups. A backup for your files can protect them away from the data loss problem. You can also check our official website: http://www.uflysoft.com to get more details about data rescue skills.

    Reasons for Data Loss Problem and Solution We Can Take

    Data loss is always a big problem for computer users and many users feel it is difficult for them to get back files because they are not the professionals who can deal with this situation. Now, this article shows you the reasons of data loss and method for recovering lost files easily.


    Top 4 reasons of File loss


    Human mistakes: Files are mostly lost due to human mistakes like accidental deletion of any file using Shift +Del keys, emptying the Recycle Bin folder / Trash Bin by mistake etc. Other than that improper handling of the external storage device (like pen drive, memory card, external USB drive etc.) may lead to file loss from that device.


    Defragmentation failure: Defragmentation failure may results important files or entire file system corrupted.. The defrag process may be interrupted due to insufficient disk space, software malfunction, operating system error, corrupt data etc.


    Power Surge: Power fluctuation or instant power surge during formatting, reformatting may interrupt the whole process resulting in file system corruption. Accidental shutdown during file transfer process may also lead to the file loss that is being transferred.


    Third party application: Third party utilities are the softwares which make use of the application related as well as the system related files. Usage of any unreliable third party utility may delete important files from your computer.



    Tips to Increase the Chances of File Recovery


    In the above scenarios, though the files are inaccessible to the user they are not permanently deleted. The lost files will remain in their original storage location until they are overwritten with some new data. Once the lost files are overwritten, then they are permanently lost.


  • Do not save any new file in the drive / partition containing the lost files

  • Do not format or reboot the hard drive

  • Do not install the recovery software on the same drive from where the lost files are located

  • If you have lost files from any external storage device, then stop using it

  • Make sure that the original location of lost files and the destination path of the files should not be same


  • What Features Should A Data Recovery Tool Has


    It restores files from various storage devices like hard disk drives (like SATA / IDE / SCSI etc.) of various popular brands (Seagate, Hitachi, Samsung, Western Digital etc.), flash memory cards (such as SD, XD, Memory stick, MMC, CF etc.) of popular brands (Kingston, SanDisk, Sony, Toshiba, Panasonic, Fujifilm etc.) , USB external drives, iPods, FireWire Drives etc.


    This utility also helps to retrieve lost Excel sheets and all other files after some software issues and malware attack.


    This software supports FAT16, FAT32, NTFS, NTFS5, ExFAT formatted partitions in Windows operating system and HFS+, HFSX, FAT16, FAT32 formatted partitions / volumes on Mac OS X.


    Best tool to recover photo from formatted SD memory card of digital camera / cell phone.


    Files deleted / lost from RAID0, RAID1, RAID5 array can be easily retrieved using this software.


    OK, this is what we got for solving data loss problem, feel free to visit our site to read more data recovery article which offer you useful tips on our site http://www.uflysoft.com.

    5 Common Causes of Computer Data Loss

    that, if you are careful, then you will not need a backup solution, but statistics say otherwise. A 2014 study shows that 46% of users experience data loss every year! This figure makes sense when you consider the five most common factors of data loss. And we will also bring you to solve "how to recover computer lost data" problem.



    Hard Drive Failure


    Hard drives are not built to last forever. Eventually, they will fail; and when they do, they will take your data with them to their silicone grave. In a study by Google, it was found that hard drives have a 50% chance of failing within five years. This is why server manufacturers recommend that you cycle out your old server for a new one every three years.



    Computer Theft


    Even if you live in a nice neighborhood, that does not mean that your home is impenetrable to thieves, or that your home is not a target. According to the Bureau of Justice, 15% of homes will be burglarized each year. This is why you lock your doors, even if you leave your home to go down the street. Once inside a home, the thief will nab expensive items like computers.


    Businesses tend to have better security than homes, but they still have to guard against employee theft. Employees are not just stealing pens and staplers; there is also the real threat of workers stealing sensitive company data. If an employee takes home a company laptop, then a thief is more likely to walk away with it than if it was locked up safe in your office.



    Computer Viruses


    Computer viruses can do more damage than just slowing down your computer or stealing credit card information. There are many nasty viruses that will infect your hard drive and wipe it clean. According to various Internet surveys, computer viruses account for 4-to-7% of all data loss.



    Natural Disasters


    There are only a few fortunate parts of the world that are not at risk from flooding, tornadoes, earthquakes, hurricanes, blizzards, or any other natural disasters that can cause data loss from either a power outage or structure destruction. No matter where your business is located, fire is always a risk that you have to consider. A Backup and Disaster Recovery solution will backup all of your company’s data off-site, just in case something ever happens to your office.



    Brain Farts


    We’ve all experienced the agony of hitting the Delete button and erasing something we didn’t mean to. Coming in right behind hardware failure, human failure is the second most common cause of data loss. Having your data properly backed up will alleviate that sunken feeling in your gut from when you accidentally delete a major project.


    When all of these factors are considered, you may start to see a data loss risk around every corner. For recovering lost data on your computer, you can view more technical support articles on our official site http://www.uflysoft.com to search the method for solving data loss problem.

    Data Loss & Data Rescue-Prevention, Protection and Solution

    With the rapid development of computer and network technique, we human being need to pay more attention for protecting the important data, especially some valuable files like personal information or enterprises' resources, need more energy to focus on 'cause the network technique development also brings some threat-like hackers who will steal those information. Some experts point out that we need to follow some rules to act the effective process to protect our data like:


  • Effectively back up the valuable data

  • Regularly maintains the hardware

  • Run anti-virus software and system-cleaning tool periodically

  • But sometimes users will still lose their data by many unexpected reasons. In this article, we will bring users the detailed information about the principal causes of data loss, how to prevent it and if users really need to face it, how to solve data loss problems.



    Main Causes We Need to Pay Attention


    The main causes of data loss sometimes are broadly separated into two categories: Software Fault and Hardware Fault.


    Software Fault includes: 1. Virus infection; 2. Wrongly formatting, partitioning; 3. Wrongly clone; 4. Wrongly operation; 5. Power-off while operating.


    Software fault generally presents as no operating system appears, read error, files are unable to find, unable to open, messy code, no partition report, etc.


    Hardware Fault includes: 1. Damage to hard disc, 2. Magnetic devices deformation; 3. Chips or other part burnout.


    Hardware fault generally presents as a hard drive cannot be read, with the sound like "crack", or the hard drive does not rotate.


    Are these so familiar? Maybe some users said that lots of these are unavoidable, but why don't users realize that even virus infection sometimes is caused by wrongly operation by our human being? What? You don't believe it? A little example: You download an app from nowhere and install it on your computer. Guess what? It brings you virus. Even worse, it steals your bank account or other personal information. So, users need to believe it.



    Let Data Do the Work


    75% of Data Loss Make Data Loss Happen


    Wrongly operation which makes data loss happen is a god damn pity thing for computer data. If we cannot get data back, it's a disaster no matter you are a boss of a company or you are just a little staff of a company.


    Delete files without careful consideration, do a wrong operation in hurry-scurry situation. All of this kind of action will cause important file loss problem. According to the research which comes from the State Information Center, almost 75% of data loss problems are caused by wrongly operation. Though users can solve data loss problem which due to software faults and the probability is getting 98%, if users can pay more attention during the process of operating, they can avoid data loss completely.


    The regular phenomena are that the above data loss problem mostly happens on a personal computer or laptop, but not server 'cause the server is always well protected by a professional. Think about if normal users get the consciousness like the professional to protect and back up the data regularly, the probability of data loss will be reduced.


    97% Of Data Loss Problem Can Be Solved


    Forced shutdown, operate on the source disk, etc. All of these actions will make data loss problem become even more worse. Shown on the report, 7% of users will turn on/off the computer repeatedly. This makes 28% of these users cannot get back their lost data. But, 42% of users do not do any operation on the computer after a data loss problem happens, and the probability of succeeding in data recovery is nearly 97%! What a big difference!


    Suit the Remedy to the Case: Use Suitable Software Can Save Data Promptly


    It is absolutely possible from a technical point of view that users can recover their lost data by using some data recovery tools (it is based on users do not do the wrong process we talk about above.) Tools like uFlysoft studio Data Recovery can help a lot even in some extreme situation like format the whole disk or storage device. It can also recover lots of files.


    But I need to remind users is that no matter what make data loss happen, as I said above, don't put any new files into the device which the lost files were stored before, or users will lose the chance to bring them back because of the data overwritten situation.


    A simple way to explain the file deletion and data overwritten-The files which were deleted are not really gone, only the space of them is freed up by the operating system. An example like this: Assume that you have one file on your hard drive and it is named "A". When you format your hard drive or delete the file "A" and empty your Recycle Bin, file "A" is not deleted forever-the operating system frees up the space of "A" so that the space can be used by new files later. This moment, you can use data recovery software to recover file "A". But if you put a new file name "B" into your drive, the "B" will take the space which was belonging to "A". This situation is called data overwritten. Once this happens, the chance of recovering files will be reduced. So I reiterate here: DO NOT use the computer after data loss happens until there is actually an effective way is found.



    Important Tips for User


    1. Follow the Steps to Process on Computer


    Some computer users do not follow the steps which were offered by the computer, when the dialog box pops up, they often click for a while. And then, problems happen. They may delete some files which are not needed to delete. So when users are operating the computer (no matter deletes a file or any other actions are taken), make sure to know clearly what the system remind you to do.


    2. Don't Rename File Optionally


    Many users sometimes like to rename the files or folders whatever they want, this also brings some troubles-a long time later, users will not remember what are the original names of the files or folders. This may also cause wrongly deletion. So, when users give a name to a file (or a folder), please give it a name which is related to the use of this file (or folder). For the Word document or Excel files which contents are modified regularly, name it with the date you modify it so that users can remember and won't delete it accidentally.


    3. Backup is very Important


    If the files are not taking up too much hard disk space, user can build a backup on the local hard disk (back it up on a different partition). If the files take too much space or the files are very important, back it up on other storage device or use cloud service to store them.


    4. Do Not Store New Files before Recovering Lost Files


    As long as the files are not being overwritten, chances of file recovery are still there. So, as I said above, don't put any new files into the drive which the lost files were stored before.



    Data Recovery Q & A


    1. Use the System Recovery Function Well

    Q: If I delete a file from the file system and make the computer down, is there any way to solve this problem?


    A: If this file is only deleted and moved to Recycle Bin (or Mac Trash), just go there and restore it easily. But if the Recycle Bin (Mac Trash) is emptied, users can still get it back by using "System Restore" function to restore it. But the Mac system is more complicated than Windows or you may use TimeMachine to restore your Mac.


    2. Files like Word or Excel Document Need to Set Auto Save Function


    Q: Like the office files Word (or Excel), if I do not save the contents, how to recover them?


    A: In the office files like Word or Excel, if users meet sudden power-off or forced shutdown, when these files are opened again, system will remind users "Unsaved file found", users just need to open it and save it. That's easy. Moreover, here remind user is that during using this kind of file, set the auto save time as "save per minute", it can protect files from data loss problem at all.


    Users who still have more questions about data can visit our home page by clicking uFlysoft studio. Get more details, protect your important data.

    What to Do If Mac Word Files Are Lost

    "I finished typing a word document, but forgot to save it, I went to minimize it when I was accessing the internet, and maybe I clicked on close? But there was no pop up to say if I wanted to save document. I tried to recover document, but not there, then went to the file tab to see if there was a trace of the last document? Nothing! Have I lost it? Or can I retrieve MS Word! If yes, what to do to recover lost Word documents on Mac? Just happen a minute ago."


    The general consensus is that if the trash has been emptied, the deleted files were gone permanently. Most mishaps on our working with computer occur because of carelessness and an itchy trigger happy finger. It is bitter lesson that’s taught to us while working on documents like MS Word, MS Excel, or any other like MS PowerPoint. They all says, save and continue to save in advance.



    Solution to Recover MS Word, MS Excel or MS PowerPoint


    Now let’s check the information of Mac Word data recovery operation. There are so many third-party applications on the market are designed to recover corrupt MS document. But no matter what kind of software you are using to recover the lost files, you must make sure it is safe and easy to use. Actually, most of the software will follow the steps below to recover your files.


    1. Install the software you choose on your computer and launch it.


    2. Scan your drive to find lost files. This may take you a long time or short time. It is based on the quality of your software and how large your drive is.


    3. Preview and save what you deleted or lost file. (If the software allow you to preview the found file.)



    Tips


    1. You cannot save the recovered files to the same drive where they were lost, therefore choose another volume or some external storage device such as a USB flash drive to save them safely.


    2. To whom want to know more about data recovery, just keep reading more articles on our official website uFlysoft studio.

    Useful Tips in Recovering Windows PC Lost Data

    Talk about the computer, most of you will think of the Windows PC, to tell you the truth, although the Apple Mac is so popular in the world because of its sharp shape, excellent function or other something else, the Windows PC is still the most used computer on the world. But no like Mac, Windows PC’s widely use also bring the problem-the data is easily to be lost due to the operation.


    “Shift+Delete”, right click to format, empty the Recycle Bin, virus infection, system crash, etc. All of these action or events usually be seen in our daily lives and make our computer files gone. Maybe you will think your fantastic computer can get the lost files back. But unfortunately, Windows OS does not provides this kind of function.


    So what to do to recover lost data from Windows PC? To begin with, the first thing first is that you should using your computer at all. Then you need to find a solution like a file recovery tool. We will talk about it later and now let’s explain the possibility of lost data recovery on your computer.



    The Possibility of Deleted/Lost Files Recovery


    When you deleted files from your computer hard drive or emptied the Recycle Bin, the files are not gone forever. Actually the “lost situation” just means the system frees space for other data, whereas the deleted file information are still remain on the place where they are belonged to. If the deleted files are not yet overwritten by other data, then there’s a good chance to restore them. That’s the reasons why the lost files still can be recovered.


    So the things here you need to keep in mind is after the files are deleted (no matter what kind of reasons), the action you take more correctly and faster, more bigger the chance of lost files recovery is. For example don’t operate on the computer to avoid the file overwritten till you get the software which can help you to get your files back.



    What the Data Recovery Tool Do to Save Your Files


    To begin with, you need to install advisable recovery tool which recovers your deleted files. Unfortunately, there are no free options, as the work this software does for you is quite tough and responsible.


    Search the net for various recovery tools and choose the one trustworthy. For example, if you want it to recover special file types, search for software that supports these types.


    And now let’s take a look at actions this software does during the file recovery operation. First of all it scans the computer hard drive (or a storage device-most file retrieval tools can also work with portable volumes) for all deleted files. If you act timely, then your deleted file will be among them. Once you target the file and preview its contents (Pay attention, only photo files can be previewed.), you should activate the recovery process. As we mentioned before, it takes you a little bit time to do the recovery, so better go to drink a cup of tea while your computer is recovering the file.


    Of course the existence of tools that can recover deleted files doesn’t mean that now you can relax, to protect the files and avoid file overwritten you need to choose another place which is safe to save the recovered files.



    Expert Tips


    1.Research shows that up to 95% of the lost or deleted files still can be recovered, but if you keep operating on your computer which makes the wrong thing like data overwritten, the probability of file recovery will decrease to nearly 30%.


    2.Remember this, no matter at the usual time or after processing files recovery, build a backup for the files periodically is necessary to avoid the data loss happen again.


    3. Feel free to visit more useful tips for data recovery on our official website uFly studio.

    Protect Your Mac from Data Loss Which Is Caused by Virus Infection

    There are so many viruses, spyware and malware infections on the internet, it’s hard to feel safe even just checking your email. Clicking on one wrong link can cause your computer to start running incredibly slow, lead to losing important files or even cause you to have to reinstall your operating system. Many people think that they are protected if they have an antivirus software suite on their computer, but that is only part of keeping your computer safe. Virus which comes from spyware or malware can make you feel bad ‘cause you still need to find way to recover the lost files. So this article is written for you to protect your computer from spyware, malware and computer virus. Now let’s check it out.



    Keep Your Antivirus Software Up To Date


    To begin with, you need to make sure that your antivirus software is up to date. This includes making sure that all virus definitions are downloaded on your computer. If your software isn’t looking for all of the newest threats to your computer, your protective software cannot do its job. Additionally, if you have a paid antivirus software subscription, the subscriptions usually only last for one year. When your subscription expires, the software no longer works and is not protecting your computer any more.



    Make Sure You Have AntiSpyware Software Also


    Having an up to date antivirus program is a huge part of keeping your computer and files safe, but if you do not have a built in antispyware program, you are still not completely protected. Viruses are programs that infect your computer and programs, causing them not to work. Spyware will cause similar results, but these type of infections keep your internet from working correctly. Spyware can also share your information, such as credit card numbers and bank account information, with hackers. If your antivirus program does not have a spyware scanner also, be sure to download one to keep your PC safe from all types of threats.



    Set Up Full System Scans


    Also important to keep your computer protected is running scheduled deep scans of your computer. While having an antivirus suite running in the background of your computer will help filter out most threats, no program can catch everything. Almost all computer security suites allow for scheduling a weekly full computer scan that will double check for threats that may have slipped past the software. These scans usually take several hours, so it is a good idea to schedule them in the middle of the night so it does not interrupt your normal computer use.



    Install a Software Firewall


    Another method to help keep your computer safe is to install a software firewall. While many routers come with built in firewalls, they are ineffective against anything other than hackers. They will not help keep your computer safe from malicious software. However, there are software firewalls that you can install on your PC that will allow you to select a list of programs that are allowed internet access. This means that any suspicious programs can be locked down before they can do any damage to your computer.


    OK, that’s what we got. How about yours ideas? Feel free to visit our official website uFlysoft studio to share yours.

    Protect Your USB Drive from Damage and Data Loss Problem

    Because of it low price, huge space for storing files, fast speed to write or read and the portability, USB drive is widely used in our daily lives and most of us will have at least one or two USB drive for storing our files.


    But just like other storage device, USB drive is only a device for us to use. Though USB drive is known as it has about one hundred thousand times read or write operation, if users do not pay attention to use it, the USB drive will also be prematurely aging. Here are some tips users may need during using USB drive or solution for solving USB drive data loss problem.



    Defragment Regularly-Right or Wrong?


    For many users who protect their computer well, they must have a good habit for defragment regularly. In the process of deleting and storing the amount of files on the computer, defragment regularly is a good way to protect the computer hard drive. But do you know it is not good for USB drive?


    The principle of storing files on the USB drive is different from computer hard drive, if users defragment for USB drive regularly, it may do some harm to the USB drive. Users can format the USB drive to instead of defragment, but don’t do it too frequently.



    Store and Delete Files-Try to Do Each Operation One Time


    When users process any operations on the USB drive (no matter read or write operation), all the data on the USB drive will be refreshed again. That means, no matter how many files you delete or store on USB drive, each operation of deleting or storing will make the whole files on the USB drive be refreshed again. In a simple example, if users store 10 files into a USB drive, the USB drive will be refreshed 10 times. This will make physical loss or damage on the physical medium of the USB drive. So next time, compress the files in one package and then store it into the USB drive.



    Pull out USB Drive When It is No Use


    Some users like to connect the USB drive with the computer and after using it. They haven’t pulled it out. But they may not know this action will bring damage to their personal information. If the USB drive is still connected with PC, and the PC is surfing the web, some computer virus will be transferred to the USB drive and it may break, even steal your personal information from the computer or USB drive. So if don’t need to use the USB drive, I suggest pulling it out of the PC.



    Hotplug Doesn’t Means Plug or Pull Optionally


    As we all know, USB drive is a device which supports hotplug. But it doesn’t mean users can plug or pull optionally. When the USB drive is reading or writing files, if users pull it out, this action will damage the USB drive itself or the files which is stored on it.



    Final Though


    Take good care of using the USB drive can make the USB drive work well and store files for a long time. So just take the tips above to protect the USB drive. Our site has more articles about using or protecting USB drive data, just feel free to visit our site by clicking uFlysoft studio.

    Some Tips You May Need to Protect Hard Drive from Data Loss

    In our daily live, when we use the computer to work or have fun, the hard drive is the highest use part because all of files and even the computer operating system are stored on it. But some times we may meet hard drive problems which are caused by software crashed or hardware failed. When we meet these problems, we may lose our important files. So the way to recover lost data is what we search after hard drive failed or crashed. So this article will show you a few tips to protect your hard drive so that you won't meet data loss problem.



    HDD Power


    The power of your hard drive some times may be ignored during you the computer. Some users even don't what is the power of your hard drive. So this makes many poor-quality power be put into our computer. This kind of power can still be reluctantly used, but once the computer upgrades the hardware (like extent memory bank or change graphics card), the power will cause some problem like restart the computer, shut down the computer even cannot turn on the computer. So a good quality power can keep safety of your computer hard drive.



    Be Careful of the Static Electricity


    As a computer lover, disassemble the hard drive is just a piece of cake-but you need to pay attention. At this moment, static electricity can do some harm to your hard drive, especially in the cold dry winter. In the cold dry winter, we human being had a lot of static electricity on our human body. If we touch the hard drive directly, the static electricity will "kill" the hard drive. To avoid this problem, before we touch the hard drive (even the computer), we'd better wash our hands or touch some metals to release the static electricity.



    Avoid Too Much Read and Write Operation


    When the hard drive is reading or writing, the magnetic head will not touch the disc-in generally speaking. So the disc will not meet any losses during this operation. But the hard drive is a part of a computer which contains mechanical components and electronic units, so the long time works will infect its life. Think about how big the differences between using the ROM to read CD/DVD and the time it doesn't read. So to protect your computer hard drive, install the software you really need but install too many apps you don't need so that you can protect your computer hard drive.



    Don't Turn Off Computer When Hard Drive is Still Working


    In generally speaking, the rotational speed of the hard drive is 7200RPM. When we turn on our computer, the hard drive is in the operation which is rotating and speeding up. If we cut off the power suddenly, strongly friction will be caused between magnetic head and the disc, and this will damage the hard drive. So when you need to turn off your computer, check clearly if all applications are turned off first, and then turn off your computer.



    Avoid the Dust


    At last, don't neglect the dust, it can do a huge to your hard drive. Hard drive can easily adsorb massive quantities of dust which are spread throughout the air. If the dust was adsorbed on the hard drive, the dust will reduce the ability of heat emission. The high temperature will do harm to the hard drive and make it down



    Final Conclusion


    Protect your hard drive carefully can help you to protect your computer from data loss problem. So just be careful the tips above. You may also view more articles on our blog or go to our official website by clicking uFlysoft studio to get more tips you may need.

    自我介绍

    StevenLee

    Author:StevenLee
    欢迎来到FC2博客!

    最新文章
    最新留言
    最新引用
    月份存档
    类别
    搜索栏
    RSS链接
    链接
    加为博客好友

    和此人成为博客好友